Cakewalk // Support // Knowledge Base // *You have not chosen any midi inputs/output" message
SONAR X1 Now Shipping Worldwide!

*You have not chosen any midi inputs/output" message

The information in this article applies to:
  • SONAR Home Studio
If you receive this message "you have not chosen any midi inputs/outputs" and your midi devices list is empty, that means one of the following is true:

*You may not have any midi hardware installed on your system, or your hardware is not installed properly

*You may be using an integrated sound card and need to tell SONAR/Home studio to use MME drivers. (see below for more about what an integrated sound card is)

*You may be using an audio interface or sound card that does not have any midi inputs or out puts.

If you are using an integrated sound card (a sound card built in your mother board and shipped with your computer) then you need to set SONAR Home studio to use MEE drivers. Heres how:
  1. Go to the options menu and choose Audio, then Advanced.
  2. Switch the driver mode setting to MME
  3. Close, then restart your cakewalk software. When you restart the software you will have the Microsoft GS Wavetable Synth as an available output under midi devices. Choosing this will allow you to play back the data stored in midi tracks.
If you are using an audio interface / sound card with out midi ports and your best option would be refer to Tutorial 8 "Using soft synths" in your SONAR Home Studio help topics sections. this will allow you to playback midi using software synthesizers.  

This page last updated: 11/5/2009

Back to Top
Tell us what you think of our new website!
share on Facebook share on Twitter print bookmark CakeTV Cakewalk blog